Add switch to a socket layer that will enable switching socket API to
TLS secure sockets. At this point there is no secure sockets
implementation, so secure socket calls redirect to regular socket calls.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Remove some 'default ""' properties on string symbols too.
Also make definitions more consistent by converting some
config FOO
<type>
prompt "foo"
definitions to a shorter form:
config FOO
<type> "foo"
This shorthand works for int/hex/string symbols too, not just for bool
symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Since vendor commands cannot assume that wIndex keeps interface number
we change logic trying to call every vendor handler which should check
input parameters.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Set subCompatibleID value according to "C:\Windows\INF\rndiscmp.inf"
file. The exact matching part is:
"USB\MS_COMP_RNDIS&MS_SUBCOMP_5162001"
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add support for MS OS Descriptors. The patch structures already
existing code for webusb to the single place to be easy added to other
places.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
If we use newlib the isdigit (and other similar functions) return an
error as char can possibly be viewed as signed:
usr/include/ctype.h:57:54: error: array subscript has type ‘char’ [-Werror=char-subscripts]
#define __ctype_lookup(__c) ((__ctype_ptr__+sizeof(""[__c]))[(int)(__c)])
Explicity cast to unsigned char so we deal with both this warning and
possible warning when -Wpointer-sign is enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
It is possible that user provides 0 hz frquency to the log_output
(if CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=0). In that case timestamp
must not be formatted to avoid division by 0.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Having 24 parameters in a debug print is a bit extreme especially
as it is causing warning from new logger. Split the debug print
to three pieces each having 8 parameters which is more reasonable.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fixes issues caused in GPIO driver due to overlapping GPIOTE
channel use in nRF5 software PWM driver and in Bluetooth
controller for implementing PA/LNA feature.
The issue is solved by assigning the base and available
channel count for GPIOTE considering whether PWM and/or
PA/LNA feature is selected in the Kconfig.
Fixes#8815.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Uninitialized variable error could lead to a situation where
printk calls processed by the logger were dropped.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Similar fix as in commit b26ca13672. Just later in the same
function. This is how the logic used to be before quite heavy redesign
that happened a while ago.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add loopback function. This function can be used to test
USB device drivers and device stack connected to linux host
and has the similar interface as "Gadget Zero" [1] of the Linux
kernel.
Use modprobe usbtest to load the module, see also [2] for the
description of the tests and for Vendor and Product ID of the
"Gadget Zero". The userspace tool testusb [3] is needed to start
the tests.
[1] linux/drivers/usb/gadget/function/f_loopback.c
[2] linux/drivers/usb/misc/usbtest.c
[3] linux/tools/usb/testusb.c
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Add callback codes for Set/Clear Feature ENDPOINT_HALT.
These can be used to inform a function that the device stack has
received Set/Clear Feature request ENDPOINT_HALT. The function can
then abort or restart the transfer accordingly.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
After PR #8608 every driver should call ethernet_init(), fixes missing
chunks of that PR.
Fixes: #8752
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The code did not check if the icmpv4 header struct is already
pointing to net_buf or not. This meant that the code did not
set the ICMPv4 options and types correctly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_addr_pton() did not check the number of ":" characters properly.
For example with following net-shell input
net ping fe80::210:2030:9b:d48efe80::210:2030:9b:d48e
the kernel panics.
Signed-off-by: Walter Xie <41377148@qq.com>
This commit adds a possibility to use Qav (credit-based shaping) in the
ethernet drivers.
There are two parameters exposed through the mgmt api: deltaBandwidth
and idleSlope.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
There is no point in sending Announces with GM chosen in BMCA if it is
expired and InfoIS is changed to MINE.
Check where does the GM info come from and fill the Announce packet
accordingly.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The problem is that net_if_call_timestamp_cb only checked if the
callback was registered for the PORT which invoked the whole action.
There is a possibility, that the callback will be registered, and packet
A will be passed to eth driver. Before the driver is finished with
packet A, network layer will start handling another packet (B) - so it
will unregister the callback for packet A and register it for B. After
that the network driver will finish processing packet A and invoke the
timestamp callback. The mechanism would then only check if a callback is
registered for the port of the driver and invoke the callback for the
packet that was registered earlier (so A instead of B).
This commit fixes that by storing info not only about the port but about
the packet too.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Previously the newer one got dropped.
The older ones will be dropped in a way that the follow up messages for
them will not be sent.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The gptp port number starts from 1, so the check was incorrect.
Use the proper define values before printing stats.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The shell did not check if the gptp port (command argument) is numeric.
Add that check before executing the port info functions.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
An empty packet on 2M phy is one more byte compared to 1M phy because
of the preamble.
The empty packet is then 11 bytes, which takes 44 us to transmit.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Address Sanitizer helps finding issues related to memory: buffer
overflows, usage of uninitialized memory, etc. This is available in
both Clang and GCC for a while, and, since the POSIX port is only
meant for testing, this will help find issues.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Fix possible null pointer dereference if the device
descriptor is not complete.
Fixes: #8700
Coverity-ID: 186841
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
A small helper function will return information whether
a given network interface has VLAN enabled or not.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit removes the inclusion of kernel_includes.h from
the nRF51 and nRF52 soc.h headers. This prevents from an
inclusion cycle formation on soc.h. In the wake of
kernel_includes.h removal, necessary header files have been
added in several source files to be able to compile Zephyr for
nRF5x SOCs.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Do not clear pending PDELAY_REQ pointer when sending a new one.
Unref the state->tx_pdelay_req_ptr first and only then set the
new pointer value. This will prevent buffer leak if we miss the
response from the peer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that the calculated ratio values are used just once.
Without this, if the ratio is even insignificantly larger than 1, the
actual clock quickly drifts to really large numbers. This causes the
sync procedure to restart too often.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The problem with the previous approach was that the response timestamp
callback which calls net_pkt_unref could be skipped if the callback was
already registered for another packet. The net_pkt_ref function was
always called which led to memory leaks.
This commit simply disallows handling multiple pdelay requests at once.
If the timestamp callback is already registered, the received request
will not be handled.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The issue was that the length field of the tlv extension in the sync
follow up packets was wrong. It is supposed to skip the length of the
header of that extension. The easiest fix was separating the header and
the actual contents into separate structs and that's what this commit
does.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
