Introduce set/get SO_SNDBUF option using the setsockopt
function. In addition, for TCP, check the sndbuf value
before queuing data.
Signed-off-by: Mohan Kumar Kumar <mohankm@fb.com>
Introduce set/get SO_RCVBUF option using the setsockopt
function. In addition, use the rcvbuf value to set the
tcp recv window.
Signed-off-by: Mohan Kumar Kumar <mohankm@fb.com>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
TCP2 is no longer needed as it is the unique implementation since the
legacy one has been removed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
With the introduction of `EXPERIMENTAL` and `WARN_EXPERIMENTAL` in
Zephyr all subsys/net and drivers/ethernet/Kconfig.e1000 settings
having `[EXPERIMENTAL]` in their prompt has has been updated to include
`select EXPERIMENTAL` so that developers can enable warnings when
experimental features are enabled.
The following settings has EXPERIMENTAL removed as they are considered
mature:
- NET_OFFLOAD
- NET_PROMISCUOUS_MODE
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
As per #38352, we would like to start building out PTP (IEEE 1588)
support for superset of gPTP functionality in Zephyr. This is the first
step to abstract away some key interfaces from NET_GPTP umbrella to
NET_L2_PTP.
Signed-off-by: Alex Sergeev <asergeev@carbonrobotics.com>
By default ICMP desination unreachable error packets are generated when
input packets target ports that are not in a listening state. This not
only reveals the presence of the host on the network which may be
considered a security vulnerability depending on the application, it
also ends up triggering ARP lookups to respond to the sending host. With
a small ARP table and a network where there may be broadcast (or
multicast) service discovery traffic such as mDNS or uPnP, ARP table
thrashing can occur impacting network stack performance.
Signed-off-by: Berend Ozceri <berend@recogni.com>
Without TX thread support in network stack USB device stack
blocks it self by usb_transfer_sync() which is
called in the same context as usb_set_interface() in sequence
of netusb_enable(), net_if_up(), net_l2_send().
Fixes: #35338
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The ISN algorithm from RFC 6528 doesn't need Mbed TLS, but rather the
MD5 algorithm from Mbed TLS. Therefore select MBEDTLS_MD and
MBEDTLS_MAC_MD5_ENABLED in addition to MBEDTLS.
This fixes the following build failure when using TLS version 1.2 is
selected:
zephyr/subsys/net/ip/tcp2.c:1329: undefined reference to
`mbedtls_md5_ret'
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
If user enables CONFIG_USERSPACE, then at least one TX or RX thread
is needed to isolate the application from the kernel space components.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Set the default behaviour of the networking subsystem so that
no TX or RX threads are created. This will save RAM as there
is no need to allocate stack space for the RX/TX threads.
Also this will give small improvement to network packet latency
shown here:
* with 1 traffic class (1 TX and RX thread)
Avg TX net_pkt (42707) time 60 us [0->22->15->22=59 us]
Avg RX net_pkt (42697) time 36 us [0->10->3->12->7=32 us]
* with 0 traffic classes (no TX and RX threads)
Avg TX net_pkt (41608) time 42 us [0->21->20=41 us]
Avg RX net_pkt (41593) time 31 us [0->9->12->8=29 us]
In this qemu_x86 test run, 40k UDP packets was transferred between
echo-server and echo-client. In TX the speed increase was 30% and
in RX it was 14%.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user has set the priority of the sent net_pkt to highest
priority (NET_PRIORITY_CA) and enabled CONFIG_NET_TC_SKIP_FOR_HIGH_PRIO
option, then push that packet directly to driver instead of TX queue.
This will make the TX sending latency smaller for the high priority
packet. This is not enabled by default.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This option was only able to collect statistics of transmitted
data. The same functionality is available if one sets the
CONFIG_NET_PKT_RXTIME_STATS and/or CONFIG_NET_PKT_TXTIME_STATS
options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove legacy TCP stack as it is replaced by the new TCP2 stack.
The TCP2 stack has been the default stack since 2.4 release.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Calculate Initial Sequence Number (ISN) as described in RFC 6528
https://tools.ietf.org/html/rfc6528
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive data that is out-of-order, queue sequential
TCP segments until we have received earlier segment or a timeout
happens.
Note that we only queue data sequentially in current version i.e.,
there should be no holes in the queue. For example, if we receive
SEQs 5,4,3,6 and are waiting SEQ 2, the data in segments 3,4,5,6 is
queued (in this order), and then given to application when we receive
SEQ 2. But if we receive SEQs 5,4,3,7 then the SEQ 7 is discarded
because the list would not be sequential as number 6 is be missing.
Fixes#30364
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Set the RX/TX thread priorities so that if cooperative priorities
are used, then lowest priority thread will have priority -1 which
is the lowest cooperative priority. The higest net thread priority
will depend on number of traffic classes but with max value 8,
the highest priority will be -8.
If preemptive priorities are used, then highest priority thread
will have priority 0, which is the highest preemptive priority.
In this case, the lowest thread priority will be 7 if there are
8 traffic classes.
The motivation for this change is that for cooperative priorities
we want to let other cooperative priority threads to run before
networking. But if preemptive priorities are used, we want
networking threads to run reasonably often compared to other
preemptive priority threads.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Let user to decide whether the RX/TX threads are run in either
co-operative or pre-emptive thread priority.
Default is co-operative threading.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We should have a max value for sending window so that application
is not able to use all our net_bufs for queueing packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
net: route: Add prefix-based ipv6 multicast forwarding
This adds/reenables the feature of multicast routing/forwarding.
The forwarding decision is based on the added multicast routes
and the new network interface flag:
NET_IF_FORWARD_MULTICASTS.
Signed-off-by: Jan Georgi <jan.georgi@lemonbeat.com>
Enable the new TCP stack as a default one in order to get people
to use it before Zephyr 2.4 is released.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow user to enable CONFIG_NET_PKT_TXTIME and
CONFIG_NET_PKT_TXTIME_STATS at the same time. This will increase
memory consumption but as the CONFIG_NET_PKT_TXTIME_STATS is
only meant to be enabled for debugging purposes this overhead
can be accepted.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Collect information how long net_pkt has travelled in IP stack
in certain points. See network documentation what these points
are and how to get information about the timings. This initial
commit adds support to TX timing collection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that only those threads that have been granted access
to net_if objects, can call the functions that modify net_if data.
The CONFIG_NET_IF_USERSPACE_ACCESS config option is also removed
as it is no longer needed after this change.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Added support for Qemu User Networking and tested with
qemu_x86 model. The support is kept simple assuming that
the TAP interface will always be preferred for more
sophisticated / practical use cases.
QEMU User Networking is implemented using "slirp", which
provides a full TCP/IP stack within QEMU and uses that
stack to implement a virtual NAT'd network. As this
support is built into QEMU, it can be used with any model
and requires no admin privileges on the host machine,
unlike TAP.
Added documentation to facilitate the user.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
Same deal as in commit 41713244b3 ("kconfig: Remove '# Hidden' comments
on promptless symbols"). I forgot to do a case-insensitive search.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Also replace some
config
prompt "foo"
bool/int
with the more common shorthand
config
bool/int "foo"
See the 'Style recommendations and shorthands' section in
https://docs.zephyrproject.org/latest/guides/kconfig/index.html.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Clean up space errors and use a consistent style throughout the Kconfig
files. This makes reading the Kconfig files more distraction-free, helps
with grepping, and encourages the same style getting copied around
everywhere (meaning another pass hopefully won't be needed).
Go for the most common style:
- Indent properties with a single tab, including for choices.
Properties on choices work exactly the same syntactically as
properties on symbols, so not sure how the no-indentation thing
happened.
- Indent help texts with a tab followed by two spaces
- Put a space between 'config' and the symbol name, not a tab. This
also helps when grepping for definitions.
- Do '# A comment' instead of '#A comment'
I tweaked Kconfiglib a bit to find most of the stuff.
Some help texts were reflowed to 79 columns with 'gq' in Vim as well,
though not all, because I was afraid I'd accidentally mess up
formatting.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add CONFIG_NET_TCP_AUTO_ACCEPT option which can be used to
automatically accept incoming data connection even if the
application has not yet called accept(). This can speed up
data transfer from peer to the application.
Problem with this is that if the peer sends lot of data and
we have limited amount of net_buf's available, then we can
run out of them which is very bad situation and can lead to
deadlocks. Because of this, the setting is turned off by default.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Calculate how long on average net_pkt has spent on its way from
application to the network device driver. The data is calculated
for all network packets and not just for UDP or TCP ones like in
RX statistics.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Calculate how long on average net_pkt has spent on its way from
network device driver to the application. The data is only
calculated for UDP and TCP network packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently the CONFIG_NET_ROUTING option has limited use as there
would be some entity that populates routing table. Previously it
was RPL that did it but RPL support was removed some time ago.
Fixes#16320
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow user to disable native IP stack and use offloaded IP
stack instead. It is also possible to enable both at the same
time if needed.
Fixes#18105
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit is an implementation of 6LoCAN, a 6Lo adaption layer for
Controller Area Networks. 6LoCAN is not yet standardised.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
The SO_TXTIME socket option can be used by the application to
tell the network device driver the exact moment when the
network packet should be sent.
This feature is also implemented in Linux.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Finalize the CONFIG_NET_CONTEXT_TIMESTAMP support that was started
earlier but never properly finished. We collect network statistics for
TX packet network stack throughput time from when the net_context_send
is called and when the net_pkt was sent out successfully by the network
device driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make IPv4 and IPv6 address addition and removal possible from
userspace app. But allow this only if CONFIG_NET_IF_USERSPACE_ACCESS
By default these operations are not allowed from userspace app.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
