The `bt_conn_index` simply returns the index
of a `bt_conn` struct. There is no reason why
such a function should not use `const`.
Not using `const` will make other lookup/index
functions that perhaps relies on the bt_conn index
unable to use `const` as well.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a new callback structure for Bluetooth authentication
This struct is meant to replace the information-only
callbacks in bt_conn_auth_cb. The reason for this is that
due to the nature of bt_conn_auth_cb, it can only be registered
once. To allow mulitple users gain information about pairing
and bond deletions, this new struct is needed.
Samples, tests, etc. are updated to use the new struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add `ing` to the `BT_ISO_CONNECT` and `BT_ISO_DISCONNECT`
states, so that the name better matches the actual state.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add `ing` to the `BT_CONN_CONNECT` and `BT_CONN_DISCONNECT`
states, so that the name better matches the actual state.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a state field in struct bt_conn_info that is a simplified
version of the internal state value (bt_conn_state_t).
This should provide an application to better determine the state
of the connection whne calling bt_conn_get_info, in case the
application does not keep track of the state itself.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This reverts commit 6bb75a53d1.
This fixes GATT that was uninitalized when application received
bt_conn_cb->connected callback. As the result, the bt_gatt_is_subscribed
was not working as expected when called from bt_conn_cb->connected.
The _bt_gatt_ccc->cfg_changed callback does not carry information about
the device that subscribed for notifications but rather is says the
app when it should start/stop broadcasting notifications.
This leads to the conclusion that the bt_gatt_ccc->cfg_changed can be
called before bt_conn_cb->connected callback.
Fixes: #42829
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This solves the following issues:
- Auto-initiation of commands is aborted if one of the issued commands
fails
- The controller return value for a PHY update or DL update is not
made available to the application.
As a result, the host no longer prevents the application from calling
bt_conn_le_data_len_update() and bt_conn_le_phy_update() before the
auto-initiated procedure completes. Now the controller may or may not
accept the additional command issued by the application.
It also simplifies the code:
- We no longer need to keep track of if the auto-phy update
or auto-dl update has completed. If the controller receives
another LE Set PHY while the procedure is pending in the LL, it can
decide if wants to accept another procedure initiation or not.
- We no longer need to auto-initiate auto-initiation of commands in
multiple places
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
A common pattern here was to take the work item as the subfield of a
containing object. But the contained field is not a k_work, it's a
k_work_delayable.
Things were working only because the work field was first, so the
pointers had the same value. Do things right and fix things to
produce correct code if/when that field ever moves within delayable.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
There were no handling of HCI_LE_CTE_Request_Failed event.
The commit adds missing implementation. An application will
be notified about failed request by cte_report_cb. It is the
same callback that is used for reporting collected CTE IQ
samples. The same callback was used to avoid creation new callback.
To give an application possibility to distinguish between regular
IQ samples report and request failed additional member err was added
to bf_df_conn_iq_samples_report structure.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add reception of IQ sample report from controller.
Add applications notification about received reports.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add new Kconfig BT_CONN_TX which is true if the ACL and
ISO configuration allows for sending data. This is mainly
used to avoid initialization of the tx_complete_work
for ISO sync receiver only builds.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If CONFIG_BT_ISO_BROADCASTER=y and CONFIG_BT_CONN=n, i.e
an ISO broadcaster only build, then the handling of the
TX callback was not properly initialized, causes a fatal
issue when sending.
This commit moves the tx_complete_work out from the ACL group
and into the common area, so that it will be enabled
for connected ISO as well as broadcaster ISO.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update the macro prototype to explicitly require the length of the
desired user data. Update all in-tree usage of this macro.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
The print specifier for `atomic_t` should be updated
to `%ld`, `%lu`, or `%lx` to account for the type
change of `atomic_t` to `long`.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
This was affecting L2CAP/LE/CFC/BV-26-C, L2CAP/LE/CFC/BV-27-C,
L2CAP/ECFC/BV-33-C and L2CAP/ECFC/BV-34-C qualification test cases.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Splitt he ISO broadcast config into broadcaster and
sync receiver. This will allow a device that only
wants to one of the roles to have a much more optimized
configuration.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Removed the bt_conn_unref from the deferred_work function.
For ISO, the conn unref for the peripheral will happen in
the bt_iso_disconnected function. For the central, the
unref shall only happen when the CIG is terminated.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When falling back to L2CAP for connection parameter updates, the
interval min and maxes should also be saved.
Fixes#38613.
Signed-off-by: Eric Johnson <eric@liveathos.com>
Align with the new inclusive naming terms in the v5.3 spec in the
Bluetooth Host implementation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add an array similar to the bt_conn (ACL/L2CAP)
tx sent callback, and initialize it.
This increases the number of bt_conn_tx available
such that ISO does not take any of "L2CAP's" buffers,
but also ensures that the sent callback is called
for a broadcast iso only build.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The new inclusive naming terminology changes in v5.3 of the Bluetooth
specification affect the HCI layer, so apply all relevant changes to
align with it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The Bluetooth Core Specification, version 5.3, has introduced multiple
changes to several widely-used terms in order to make them inclusive.
Update the public API to reflect this, excluding hci.h, which will be
done in a subsequent commit.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Instead of disconnecting ISO channels on ACL,
we put them in a non-connected state, and wait for
the ISO disconnect events.
This ensure that the controller has free'd the
ISO channels when the iso disconnect callbacks
are received. It will thus be possible to e.g.
terminate the CIG on the ISO disconnect callback.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When an ISO channel is disconnect on the central, it is
not deallocated, but merely disconnected. This is because,
as per the HCI spec, the CIS handle lives on in the CIG.
Instead of unref'ing the bt_conn to 0, we simply put the
channel and connection in the disconnected state.
This also fixes a few missing returns for
terminating a CIG.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Make the name of the internal bt_conn pointers explicit as to
whether they point to an ACL or ISO bt_conn.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move the function out of the ACL group as it may be used
for broadcast ISO only builds.
er 31045c7 was merged, it was possible to use broadcast
iso without CONFIG_BT_CONN, but it did not properly handle
TX and RX as there were missing support to read the buffer
size from the controller, as well as missing support
for handling the number of completed packets event.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This migrates all the current iterable section usages to the external
API, dropping the "Z_" prefix:
Z_ITERABLE_SECTION_ROM
Z_ITERABLE_SECTION_ROM_GC_ALLOWED
Z_ITERABLE_SECTION_RAM
Z_ITERABLE_SECTION_RAM_GC_ALLOWED
Z_STRUCT_SECTION_ITERABLE
Z_STRUCT_SECTION_ITERABLE_ALTERNATE
Z_STRUCT_SECTION_FOREACH
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
We had added a break in a switch statement that stopped
ISO channels from setting the BT_CONN_CLEANUP flag
which in turn stopped them from disconnecting (in the
eyes of the upper layers) properly.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the bt_acl_recv function that works similar to
bt_iso_recv but for ACL data only, simplying the
generic bt_conn_recv function.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move the bt_conn_disconnect and conn_disconnect functions
to the ACL group.
Also adds a guard in the iso.c file for connected ISO.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move the notify_le_phy_updated, notify_le_data_len_updated,
notify_le_param_updated, notify_remote_info,
notify_disconnected and notify_connected functions
to the ACL group.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move the deferred_work callback function to the ACL group.
This also moves the static function conn_lookup_iso
which is only called form deferred_work.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
