nrfjprog prints out a warning if a device is programed without the
--verify option, which can be confusing.
So added the option when programming with nrfjprog.
Then west flash can be used without getting a warning.
Also changed the tests to only accept programming with --verify
option.
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
CONFIG_OPENOCD_SUPPORT was deprecated in favor of
CONFIG_DEBUG_THREAD_INFO in Zephyr v2.6.0 and can now be removed.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
This print() call was introduced as part of commit 16571db029 ("soc:
esp32: add support to mcuboot build") probably as a leftover from
debugging stage. Remove that, so flash command is not printed by
default. Those commmands can be easily printed by passing -v flag to
`west -v flash ...` command.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Whenever build/zephyr/runners.yaml does not specify the location of the
openocd executable we seemd to be leaving the executable variable as
None. Instead, use its executable name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Select configuration when mcuboot is enabled.
At this moment, only UNSIGNED image is supported as per
Espressif's mcuboot porting.
This also updates esp32 runner to use proper bin_file name
and updates default bootloader check.
Move CMakeLists.txt content from board to soc directory
as this support is for esp32 architecture and not board
specific.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
IDF bootloader requires partition table which is not a requirement for
MCUboot. Hence, esp32.py is updated to flash partition table only if it
exists.
Current implementation only allows flashing zephyr.bin. This commit adds
capability to flash binaries with other names as well
(e.g. - zephyr.signed.bin)
Signed-off-by: Shubham Kulkarni <shubham.kulkarni@espressif.com>
This commit implements west flash command for Telink B91 platform.
west flash command uses ICEman and SPI burn from AndeSight for flashing.
Signed-off-by: Alex Kolosov <rikorsev@gmail.com>
Add yet another option, --verify-only, to west flash. This option
runs openocd with verify_image but without load_image.
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
OpenOCD has verify_image command. Add `--verify` option to west flash
so that openocd can do vierfy_image right after load_image.
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
Black Magic Probe supports a "monitor connect_srst" command [1] to
configure whether to assert reset when connecting to the target. This is
useful to reprogram a target that may be idling in a low power state,
with an otherwise unresponsive debug core.
Adding a --connect-srst runner option for enabling this for "flash" and
"debug" operations to ensure that programming works in that case, but
also explicitly disabling it for "attach", to allow attaching to a
running target without changing its state.
Not turning this on by default since apparently some MCUs disable the
SWD interface while in reset.
[1] https://github.com/blacksphere/blackmagic/wiki/Useful-GDB-commands
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Add GigaDevice ISP console flash runner. This tool enable uses ROM
bootloader to flash devices using serial port.
The GD32_ISP_Console tool can be found at
http://www.gd32mcu.com/download/down/document_id/175/path_type/1
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Add "ExitOnError 1" argument that treats any command-error
as fatal thus in the case of a programming error the "west flash"
command will return the correct error code instead of the default 0. It
fixes the false positive return codes when e.g we call west flash
command without a connected programmer or with the disconnected board.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Always add the boards/<arch>/<board>/support directory to the OpenOCD
runner search path if the directory exists.
This simplifies using custom --config <partial-board.cfg> runner
arguments without having to use the full path to the cfg file.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
#38557 Reordered the argument for openocd, but we should not try
to call the init command before giving the board configuration
file stored in 'self.cfg_cmd'.
Move back this variable to it's original position.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Commits 49bcc08033 introduced
a possible None object 'gdb_init', do not try to iterate over
this variable if it is a None object.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Poll the flash status instead of just reading the flash status once. Add
support for controlling the number of SDO retries and the SDO timeouts.
These changes allows for greater control of the CANopen program
download, which is especially useful on noisy or congested CAN networks
and on devices with slower flash access.
Fixes: #39409
Signed-off-by: Klaus H. Sorensen <khso@vestas.com>
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
In order to allow for further options to be deprecated with minimal
impact, add a deprecation argparse Action and a callable instantiator
that can be used to deprecate options in favor of new ones.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In an effort to standardize the way that a particular debugger or device
instance is identified when there are multiple present, introduce a new
-i/--dev-id option common to all runners that allows the user to specify
which device to interact with when there are multiple connected.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Debugging ESP32 SoCs is not possible if the commands
halt, target and load are enabled by default.
This MR allows this configs to be used as input parameters.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
When enable thread awareness feature for OpenOCD the search path was
converted to a list. In some environments OPENOCD_DEFAULT_PATH may
not be defined. That create an empty search path list system fails.
This add a test to skips fill search_args with openocd_search values
when list is empty.
Fixes#38272.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Add support for specifying a custom OpenOCD command to be used for
resetting and halting a target.
As noted in the OpenOCD documentation, not all targets support the
"reset halt" command for halt-on-reset.
Some targets support a software emulation via the "soft_reset_halt"
command. Other targets may require a custom command (e.g. a command
defined in the target configuration file).
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Zephyr thread awareness is available for openocd but boards don't
have debuggers configuration. This configure OpenOCD runner
automatically to complete configuration.
User still require enable CONFIG_DEBUG_THREAD_INFO=y to visualize
thread debug information.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Some targets require no 'halt' to be issued i the gdb server command.
Add a --no-halt option to make it possible.
Keep use of halt as the default case.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add support for passing the --config argument to the openocd west runner
multiple times.
This allows for using modular openocd configuration files (e.g. CPU core
configuration in one file, independent of the selected JTAG interface
type).
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Handle serial numbers provided from the command-line instead of forcing
the user to provide 'tool-opt' manually.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Current default serial port used for flashing is
/dev/ttyUSB0. This changes that to automatically detect the device
serial port or uses the one exported to the environment.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
by adding the soc specific files such: soc initialization code,
linker scripts and support for esp32c3 devkitm
Signed-off-by: Felipe Neves <ryukokki.felipe@gmail.com>
Signed-off-by: Felipe Neves <felipe.neves@espressif.com>
The ARConnect Inter-core Debug Unit (ICD) provides
additional debug assist features in multi-core scenarios.
In master core(core 0) initial stage, we will program ICD to halt
all other cores based on a halt occurring in one ore more core.
And all cores are in halt mode on reset, so we need to make
sure other slave cores have launched and in running mode
before we enable ICD in master core.
Currently we launch master first, Let's reverse the launch
order, launch master last, to make sure slave cores have
launched before we program and enable ICD.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
So when for instance adding some `import wrong_module` line to a sample
runner like bossac.py this adds the text between parentheses ( ) below:
The module for runner "bossac" could not be imported (No module named
'wrong_module'). This most likely means it is not handling its
dependencies properly. Please report this to the zephyr developers.
Test tip: changes to bossac.py do not trigger a fast, incremental doc
build. touch doc/guides/west/build-flash-debug.rst does it instead.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Add compatibility mode with old sam-ba flash bootloaders that don't have
offset capabilities. These bootloaders flash to a pre-defined flash
region. At end, bossac will suppress --offset parameter.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Fixes compatibility with the Arduino bootloader reset mechanism when
using `west flash` on Darwin hosts.
stty is used to set the serial port in the bossac runner to 1200 baud on
Arduino ATSAMD21 bootloaders. The `-F` argument to stty is a GNU
coreutils addition, and thus it is missing from Darwin's BSD stty, so
change the flag to `-f` when we're not running on Linux.
On Darwin, set DEFAULT_BOSSAC_PORT to None and ask the user to select
one from a list of IOCalloutDevices reported by ioreg, modelled on the
get_board_snr from the nrfjprog runner. This is because serial port TTYs
are generated by the device driver, and therefore there is no safe
default.
Tested with an Arduino Nano 33 IoT board.
Signed-off-by: George White <me@galexite.uk>
Support this when debugging also.
Tweak the style for brevity also while we're here by propertizing the
supports_nogui method, etc.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This makes it easier for runners to check if the binary has thread
info support turned on, allowing automatic configuration of the
underlying tool to support threads, if possible.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Set options that are definitely true or false to True or False in the
options dict. Add a 'getboolean' method that also allows a fallback to
False in case the option is not mentioned in .config due to unmet
dependencies. This allows calling code to just ask about the option
they are interested in, even if the .config file doesn't mention the
option at all.
Propagate this to users within the runners package and 'west sign',
taking advantage of the new build_conf property.
Rename the 'bcfg' internal variable in sign.py to 'build_conf' to
match other source files that use BuildConfiguration instances, to
make it easier to grep for users.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Instead of mocking out the BuildConfiguration class, just create its
input file and let the real class do the work.
This in turn exposes a bug in the way the board name is being pulled
out of the BuildConfiguration, which we fix to keep the tests passing.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is really verbose, and I doubt anyone cares unless there is a
problem. Keep it around when run as 'west -v flash' to allow for
debugging, though.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Defer loading .config until we really need it, when we are flashing a
binary. Pre-emptively loading it is wasted effort if we're flashing a
.hex, which has been the default behavior when possible since
dcaabb860f ("west: runners: jlink: prefer .hex over .bin").
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Put it all in one log message rather than splitting it up.
This makes it look cleaner now that each log message is prefixed with
'runners.link:'.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
JLink versions like 'V7.0a' do not conform to PEP 440 version
conventions; the 'a' part is used by PEP 440 compliant versions for
alphas. It gets parsed to a legacy type by the packaging library,
which always is treated as a lower value when compared with a
conforming version string.
To fix, get the version from the shared library distributed with the
JLink tools. This has the side benefit of making the code work on
Windows. That's merely a nice to have for -nogui 1 detection for now,
but will be essential in the next commit.
Reported-by: Jake Mercer <jake.mercer@civica.co.uk>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
