Added new LE Feature Support bit mask as documented in
Bluetooth Spec. v5.3 Vol 6, Part B, Section 4.6 Feature
Support.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
CTE request control procedure may failed due to rejection by
peer device or due to receive of LL_CTE_RSP PDU without CTE.
These events has to be reported to host by HCI_LE_CTE_Request_Failed.
The commit adds missing functionalit.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Request interval is a number of connection events that
is used to periodically run CTE request control procedure.
BT 5.3 Core Specification defines it as 2 octets long.
It had wrong type uint8_t. Changed to correct one uint16_t.
The commit also changes type of cte_rsp_en field of lll_df_conn_tx_cfg
to state that it is a boolean flag.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add a macro to retrieve the iso data load length (the
length stored in the iso header) with a bit mask that
ensures that we only take the first 14 bits.
This is to remove any RFU bits that may have been set.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The filtering of periodic advertisements by scanner may be not needed
in certain situations e.g. while use of periodic advertising by BT ISO.
To make the code smaller and avoid execution of not needed code the
functionality will be conditionally compilable. It may be enabled
or disabled by use of CONFIG_BT_CTLR_SYNC_PERIODIC_CTE_TYPE_FILTERING
Kconfig option.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The commit adds helper macros for verification of disallowed
CTE types when periodic advertising synchornization is created.
The macros are added here, because they are directly related
with values specified by BT Core 5.1 specification.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The new inclusive naming terminology changes in v5.3 of the Bluetooth
specification affect the HCI layer, so apply all relevant changes to
align with it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
AMP functionality was removed from the v5.3 specification. Remove
AMP-related macros since they no longer map to anything in the spec
itself.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add features: connection CTE request, connection CTE response
and receiving constant tone extensions; to HCI and features
supported by controller.
The features are not enabled yet.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The Bluetooth Core spec 5.2 requires to provide CTE type in
periodic advertising report.
The implementation of le_per_adv_sync_report assigned
value zero to be default CTE type. The assigned value
in Bluetooth Core spec 5.2 means "AoA Constant Tone
Extension". In case there is no CTE attached to periodic
advertising PDU, CTE type should contain value 0xFF.
This commit fixes the issue.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add a define for invalid Extended Advertising SID value of
255 required when generating legacy advertising report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The Bluetooth 5.3 specification was recently released, and
has a new version identifier (12) assigned to it in the
Bluetooth Assigned Numbers.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Align name of bt_hci_cp_le_set_cl_cte_tx_params::ant_ids
to other direction finding related commands.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add implementation of events: HCI_LE_Connection_IQ_Report and
HCI_LE_CTE_Request_Failed for Bluetooth 5.1 Direction Finding.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add implementation of HCI_LE_Connection_CTE_Response_Enable
for Bluetooth 5.1 Direction Finding.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add implementation of HCI_LE_Set_Connection_CTE_Receive_Parameters
for Bluetooth 5.1 Direction Finding.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Added an API to the HCI header that can be used to retrieve
advertising handle information from a given advertising set.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Fix issue is host handling of connected and disconnected event.
Since the host wants the disconnected event to be processed as a
priority event as well as in reguler event context while the connected
event is always in reguler event context we can end up in a situation
where the disconnected priority event is processed before the connected
event.
Since the disconnected priority event is there to release unack'ed TX
pending on the connection in case the RX thread is blocked waiting
for TX resources, we need to keep this behavior. Otherwise this would
be a potential deadlock of the RX thread waiting for resources that can
only be released by the RX thread.
When this situation happens we know that there cannot be any pending TX
on this connection so we can safely skip releasing of unack'ed TX.
The second thing the disconnected priority event does is marking the TX
path on the connection as disconnected. We need to do the same in this
situation, so we make sure that the TX path is already marked
disconnected when providing the connected callback to the application.
This fixes a regression from 4be66bd33d.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Rename LE Read Buffer Size v2 struct members to related to
Bluetooth Specification use Length and Number terminology.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add connectionless CTE RX feature to list of features supported
by controller. Add direction finding initialization in hci_core
if the feature is enabled.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add HCI_LE_Connectionless_IQ_Report event that will allow controller
to report received CTE and provide collected IQ samples to host.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add new command HCI_LE_Set_Connectionless_IQ_Sampling_Enable that
will allow host to enable CTE sampling in controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
All commands are put in the file according to OpCode Command Field
increasing order. bt_hci_cp_le_set_cl_cte_tx_enable was written in
wrong position. This commit moves it to correct one.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
First design towards ISO adaptation layer, this PR introduces
data-structures and framework for Rx unframed PDUs (BT RX ingress).
Two callbacks are defined for the SDU production (BT RX egress), one for
SDU allocation as well as a callback for emitting a reassembled SDU.
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
Added initial support for BIS (broadcast ISO stream), which
adds support for creating BISes as both broadcaster and receiver,
as well as managing and creating BIGs.
Extends PA sync to handle BIGInfo adveritising reports.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add definitions for the HCI command LE Generate DHKey v2.
This command includes the option to use the debug private key.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Set #0 is used for legacy advertising when legacy HCI commands are used
and in such case it's possible to enable advertising without any prior
configuration. This means we should better always have PDUs in set #0
initialized with default empty data.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Remove the deprecated Advertising Types definitions.
These have been deprecated in the 2.3.0 release.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add implementation of HCI_Set_Connecitonless_CTE_TX_Enable
command to HCI. Add scratch implementation of command handling
functions to controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add implementation of a wrapper for HCI_LE_Set_-
Connectionless_CTE_Transmit_Parameters send command.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add Direction Finding to host initialization sequence.
It allows to get information about Direction finding
optional CTE settings supported by controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add implementation of HCI_LE_Set_Connectionless_CTE_-
Transmit_Parameters command in HCI.
Add implementation of command handling in controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add defines and structs for reading information about supported codes,
codec capabilities and controller delays. Return parameter structs for
commands that return multiple variable-length fields only model the
fixed-length fields to minimize inconsistencies.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Add implementation of HCI_LE_Set_Connection_CTE_Transmit_Parameters
for Bluetooth 5.1 Direction Finding.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add Bluetooth 5.1 Direction Finding HCI command:
HCI_LE_Read_Antenna_Information handling to Host.
Add wrapper function to handle send the command
and receive response from Controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Put infrastructure for the following HCI commands/events in place:
* LE Setup ISO Data Path command
* LE Remove ISO Data Path command
* Configure Data Path command
* LE Set CIG Parameters Test command
* LE ISO Read Test Counters command
* LE ISO Receive Test command
* LE ISO Test End command
* LE ISO Transmit Test command
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
Adds support for the periodic advertising sync transfer
(PAST) feature, which allows a synced device, or an
advertiser, to transfer synchronization of a periodic
advertising train to a connected device.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
