If VLAN count is set to 0, then only priority tagged VLAN frames
that have tag value 0 can be received. Also this means that VLAN
interfaces are not created which can save memory if you do not need
to receive any other VLAN frames than those tagged with value 0.
Fixes#84023
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The event monitor did not handled IPv4 multicast address
addition or deletion information.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
To simplify debugging what event code is missing from the
events shell module, print also event id for the for unknown
events. This way it is a bit easier to figure out what the
unknown event is.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Print Ethernet carrier on/off and VLAN tag enabled/disabled
status when monitoring events.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When defined both CONFIG_NET_BUF_POOL_USAGE and
CONFIG_MEM_SLAB_TRACE_MAX_UTILIZATION, support using 'net mem' cmd
to get the maximum count of used buffers and net packets.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
This macro is defined in a few places which leads to macro redefinition
error e.g. when compiling prometheus network sample for NPCX boards.
Provide one definition of IS_BIT_SET() in util_macro.h to fix the
problem.
Signed-off-by: Patryk Duda <patrykd@google.com>
Use the net_icmp_send_echo_request_no_wait() when sending
ICMP Echo-Req so that we can avoid the warning message from
system workqueue handler.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Show information whether PMTU is enabled or not.
Show pmtu destination cache content with "net pmtu"
command. The "net pmtu flush" can be used to clear the
cache.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Print information in "net ipv6" command how the SLAAC addresses
are generated. There is the default legacy EUI-64 method (RFC 4862) or
the stable method described in RFC 7217.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If network interface is specified in the DNS server, then send
the queries to the server via the network interface. Print this
information in the server list.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Switch from using direct `strtol` calls to `shell_strtol`.
This change leverages the extensive error handling provided
by `shell_strtol`.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Since `<host>` is a mandatory argument, the (_mand, _opt) values
should be adjusted to 2 and 12, respectively.
Note that `_mand` includes the number of mandatory arguments,
including the command name (`ping` itself).
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Two ethernet capabilities were missing. Added them to allow
the 2.5G and 5G strings to appended.
Signed-off-by: Christoph Seitz <christoph.seitz@infineon.com>
CONFIG_ZVFS_POLL_MAX is now used to control the maximum number of poll()
entires. Thereby, CONFIG_NET_SOCKETS_POLL_MAX is redundant and shall
be deprecated.
Modify the defaults for NET_SOCKETS_POLL_MAX and ZVS_POLL_MAX so that
the deprecation actually makes sense instead of symbol removal. In case
the application still sets the old config, it will modify the
ZVS_POLL_MAX default.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
IPv6 MLD API was so far defined in an internal header. This does not
seem correct though, as application code should be able to join/leave
multicast groups, hence the API should be exposed in a public header,
just as it is done for its IPv4 countepart - IGMP.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The stack size for the event_mon_stack task may need to be larger than the
default 1024 to avoid crashes. It should be configurable through Kconfig
so that source code doesn't need to be modified to increase it.
Signed-off-by: Dave Rensberger <davidr@beechwoods.com>
If DNS statistics is enabled in Kconfig, then start to collect it.
This is useful in order to see how many DNS requests/responses
received or sent, and also see the amount of dropped DNS packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
User can set CONFIG_NET_SHELL_SHOW_DISABLED_COMMANDS=n to prevent
unused net-shell commands from showing. This can save flash as
the disabled commands will not be shown in net-shell listing.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
It is useful to know the currect status of DHCPv6 client when
printing the interface information.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow "net virtual" command to attach or detach virtual
interfaces. This is useful for device management.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Increased variable to the mandatory amount of commands, since the
comment of SHELL_SUBCMD_ADD states
"Number of mandatory arguments including command name"
but net suspend takes the interface number to suspend
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
Since the `_impl` naming convention is intended for internal use only,
renaming these functions to the `shell_fprintf_xxx` variant is
more suitable for calls outside the module:
- `shell_info_impl` to `shell_fprintf_info`
- `shell_print_impl` to `shell_fprintf_normal`
- `shell_warn_impl` to `shell_fprintf_warn`
- `shell_error_impl` to `shell_fprintf_error`
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Building with NEWLIBC triggers warnings about
snprintf since stdio is no longer automatically
included by printk.h
This PR switches to using snprintk to avoid these
warnings.
Fixes#77330
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Adds commands for triggering conn_mgr functions and
tweaking conn_mgr connectivity flags.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
adds filesystem as a resource for the http_server which serves static
(gzipped) files from a filesystem to the client.
Signed-off-by: Gerhard Jörges <joerges@metratec.com>
Due to the introduction of `shell_xxx_impl` wrapper functions in
PR #75340, we can minimize caller overhead by eliminating direct
`color` parameter passing.
This is achieved by using `shell_print_impl`, `shell_error_impl`,
`shell_info_impl` and `shell_warn_impl` instead of `shell_fprintf`.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
In case packet read fails for any reason, there's no point proceeding or
printing the byte, just break the loop in such case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
For each of the fdtable.h functions listed below, convert the
z_ prefixed semi-private functions to use the zvfs_ prefix.
ZVFS stands for Zephyr Virtual File System and
is intended to be a common library used by the C library,
POSIX API, Networking, Filesystem, and other areas.
There are already a few functions in fdtable.h that use the
zvfs_ prefix, so this change is mostly about unifying them in
a way that uses a suitable prefix ("namespace") so that it can
be considered a public API.
- z_alloc_fd
- z_fdtable_call_ioctl
- z_finalize_fd
- z_finalize_typed_fd
- z_free_fd
- z_get_fd_obj
- z_get_fd_obj_and_vtable
- z_get_obj_lock_and_cond
- z_reserve_fd
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Add descriptions for recently introduced IPv4 and IPv6
connectivity events to the net event monitor.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Add option for setting a random MAC address to
the net iface set_mac command. With random option
a random MAC address can be assigned to an interface.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
The new command is "net http" which shows all services and
related resources defined in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Fixing the websocket command output to align the fields and
printing interface index instead of a pointer value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When printing IPv4 and IPv6 address information in "net ipv4" and
"net ipv6" commands, print also reference count of the IP address.
This is useful for debugging purposes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
