Several advertising data function could return -1 in case of
errors, which could mess up the advertising data since they are
intended to increment a counter.
Instead of returning an error we use bt_shell_error to inform
the user and then just return with no data changes, so that if
any of them fails, the failing data is just omitted rather
than causing major issues.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added initial CCP client implementation that simply
does discovery of TBS on a remote CCP server.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added option to set the PACS Characteristics through the bap API,
making PACS configuration runtime available. Source and Sink PAC, as
well as Source/Sink PAC Location is can be set through a register
function in the PACS api.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
This change aims to eliminate the dependency on `ctx_shell` in
the Bluetooth `audio/shell/*`, making the code more maintainable.
Replaced `shell_*` functions that depended on `ctx_shell` with
the appropriate `bt_shell_*` functions.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Both the TMAP kconfig file and public header file defined
which roles were supported.
The Kconfig file options were recently added and were more
up to date (and correct), and allows for other Kconfig files
to use these values, thus allowing for more flexibility when
implementing applications.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The CCP API for the Call Control Profile works on top of the
TBS API, and will eventually replace parts of the TBS API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If logging (CONFIG_LOGGING) was disabled, then the shell
could not build. Ideally the (test) functions should not
depend on logging, but rather only CONFIG_BT_TESTING.
The shell commands were also properly guarded.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify ASCS and BAP Broadcast sink to depend on the PAC options
instead of selecting them.
Since Kconfig does not support "depends on X if Y",
a select for PAC_{SRC,SNK} is used depending on
ASCS_ASE_{SRC,SNK}.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add conversion macros from milliseconds to various units.
The purpose of these macros is to make it more clear/easier
for users to set and read values using milliseconds rather
than the various BT units which may be in 0.625, 1.25 or 10ms
units.
This is especially useful when comparing related values using
different units, such as advertising interval (0.625ms units)
and periodic advertising interval units (1.25ms units).
Users will have to be aware that these macros can provide slightly
different values than what is provided, if the provided values
do not match the units.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Removed the LE Audio specific definition and instead
refer to the value defined by iso.h as it is ISO/Core
that defines this size, and not BAP/Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Removed the generation of broadcast id inside the stack. It is now up
to the application to generate this by itself. The CAP sample has
been modified to allow either a static broadcast, or a random one.
All of this is handled in the application.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Add create_sink_by_name command that scans for broadcast sources
with BT_DATA_BROADCAST_NAME matching the name given to the shell
command.
Fixes#70837
Signed-off-by: Babak Arisian <bbaa@demant.com>
If the Broadcast ID is initially set to 0x000000,
which is valid, comparison logic on add of an
actual Broadcast ID of 0x000000 fails.
Likewise for SID.
Moving INVALID_BROADCAST_ID define to bap.h
Signed-off-by: Lars Knudsen <LAKD@demant.com>
The QoS structure is not related to a codec, but rather a
stream, and should thus not use the "Codec" name.
The BAP and ASCS specs refer to the QoS as
"QoS configuration" several places, so it is an obvious
choice for a name.
Since the structure is defined and used by BAP, the prefix
was changed from bt_audio to bt_bap.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The unicast_stop function is changed to primarily do a
BAP disable instead of a release, with optional
support for releasing the streams once they have been disabled.
This also adds unittests for the procedure which also
allow us to remove the invalid param testing from the BSIM tests.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added support for dynamic registration and unregistration of the
Broadcast Audio Scan Service (BASS) within the scan delegator.
This enables both scan delegator and BASS to be registered or
unregistered dynamically at runtime.
Signed-off-by: Babak Arisian <bbaa@demant.com>
The CSIP spec states that the procedures shall only be done
on bonded devices, so a check for that was added.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The TBS and GTBS instances can now be dynamically registered
and unregistered, which fits better for the use cases of TBS
where specific bearers can come and go depending on the
features of the device.
For example if a SIM card is inserted, then a device can
register a TBS for the provider and remove it again if the
SIM card is removed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Moves around the shell files so that they are placed nearer
to the features they expose access to.
A few changes as possible has been made.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This fixes a bug where the shell will reject setting available
context to 0x0. This has now been moved to only affect supported
context instead.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Any places that checked for GTBS is now always enabled
as GTBS is mandatory to support, and the Kconfig option
was removed.
Also removed a duplicate Kconfig option for TBS,
BT_TBS_SERVICE_COUNT, as it was unused.
The other Kconfig option BT_TBS_BEARER_COUNT is used
instead exclusively to set it if needed.
Since GTBS can now exist alone, it must also
support having its own calls and other values.
This means that the GTBS and TBS instances now share
the same underlying struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added option to set the ASE count through the bap API, making ASE
configuration runtime available. The upper limit of ASEs are still
bound by the Kconfig options set for ASEs.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Move the network buffer header file from zephyr/net/buf.h to
zephyr/net_buf.h as the implementation now lives outside of the networking
subsystem.
Add (deprecated) zephyr/net/buf.h header to maintain compatibility with old
file path.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Add to_str functions for context, parental rating, active state,
codec cap freq, codec cap frame duration,
codec cap channel count and location.
The remaining values are just numeric values and does not
need a to_str function.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This allows applications to modify the values set by an
existing unicast group, assuming that none of the streams in
the CIG has been connected.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add conn parameter to status/flags callbacks of bt_vcp_vol_rend_cb
to differentiate between remote and local changes.
Signed-off-by: Chang An <chang.an_1@nxp.com>
Modify the bt_bap_scan_delegator_add_src to take an address and
a sid instead of a PA sync object, so that the scan delegator
can add a source without syncing to the PA.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Refactors teh BIS bitfield values used for ISO
and BAP.
Previously BIT(1) meant BIS index 1, which was a Zephyr choice
in the early days of ISO, as the BT Core spec did not use
a bitfield for BIS indexes.
Later the BASS specification came along and defined that
BIT(0) meant BIS index 1, which meant that we had to shift BIS
bitfields between BAP and ISO.
This commit refactors the ISO layer to use BIT(0) for Index 1 now,
which means that there is no longer a need for conversion
between the BAP and ISO layers, and that we can use a value
range defined by a BT Core spec (BASS).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Utilize a code spell-checking tool to scan for and correct spelling errors
in all files within the `include/zephyr/bluetooth` and `subsys/bluetooth`
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Utilize a code spell-checking tool to scan for and correct spelling errors
in all files within the subsys/bluetooth/audio directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add add_by_broadcast_name command that scan for broadcast sources
has BT_DATA_BROADCAST_NAME that matches with whatever name is given
to the shell command.
Fixes#70836
Signed-off-by: Babak Arisian <bbaa@demant.com>
Added a fallback parameter to
bt_audio_codec_cfg_meta_get_pref_context
as absence of pref context in BAP implicitly means a unspecified
for LC3.
In the case that it is absent BT_AUDIO_CONTEXT_TYPE_UNSPECIFIED
is the returned value.
While the metadata for codec cfg and codec cap are similar,
this only applies for codec cfg as per BAP.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added a fallback parameter to
bt_audio_codec_cap_get_max_codec_frames_per_sdu
as absence of max codec frames per SDU in BAP implicitly
means a single frame for LC3.
In the case that it is absent 1 is the returned value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added a fallback parameter to
bt_audio_codec_cap_get_supported_audio_chan_counts
as absence of channel count in BAP implicitly means a single channel
for Lc3.
In the case that it is absent 1 is the returned value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added a fallback parameter to
bt_audio_codec_cfg_get_chan_allocation as absence of
channel allocation in BAP implicitly means Mono.
In the case that it is absent,
BT_AUDIO_LOCATION_MONO_AUDIO is the returned value.
This commit also fixes the implementation of
bt_audio_codec_cfg_get_frame_blocks_per_sdu as it only applies to
LC3 (as per the BAP spec). It also adds additional testing of it
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The 3-byte value suits the assigned number much better,
and also allows for less memory copies when getting and
setting the values.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove the "stream" part of the value and functions to
better fit with the name in the assigned numbers document.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds, removes and modifies includes in all LE audio
files.
Fixes any found spelling mistakes as well.
Fixes a few places where incorrect types were used.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Removes the CIS connection establishment from bt_bap_stream_start
and move the behavior to a new funciton bt_bap_stream_connect.
This has 2 advantages:
1) The behavior of bt_bap_stream_start is much more clear and more aligned
with the spec's behavior for the receiver start ready opcode.
2) It is possible to connect streams in both the enabling
and the QoS configured state with bt_bap_stream_connect as
per the spec. This allows us to pass additional PTS test cases.
To implement this new behavior, samples and tests have been updated.
The CAP Initiator implementation has also been updated
to accomodate for the change in BAP, but the CAP
initiator implementation should work the same for application, except
that it's now possible to do unicast start on ASEs in any order
(https://github.com/zephyrproject-rtos/zephyr/issues/72138).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The cap_initiator unicast_stop shell command had the wrong
minimum parameter count (as it defaults to all).
Some indentation had also gone wrong for it in the
documentation.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
