Introduce new DAI driver used for NXP's PDM MICFIL IP.
This block implements required digital interface to provide
a 24-bits audio signal from a PDM microphone bitstream in a configurable
output sampling rate.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Add icm42x70 device tree file, it includes the common properties
for icm42370-p, icm42670-p, and icm42670-s.
Add icm42370-p device tree files for SPI and I2C interface.
Signed-off-by: Aurelie Fontaine <aurelie.fontaine@tdk.com>
The PCA6416A is a 16-bit general purpose I/O expander that provides
remote I/O expansion for most microcontroller families via the I2C-bus
interface.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
This commit renames the KSO16 and KSO17 for consistency with the naming
convention used for other KSO pins.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Add properties to differentiate the timer counter operating modes. This
properties are necessary to spetialize the driver to be used as a normal
16/32-bit counter or to provide the clock/calendar functions.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Add wsen_pads_2511020213301 driver with
the corrected name and compatibility with
the hal update as well as added new features.
Signed-off-by: Wajdi ELMuhtadi <wajdi.elmuhtadi@we-online.com>
The property descriptions contain a lot of unneeded and driver-
specific information. As such, make them shorter while removing
driver-specific information.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Improve the silabs ldma driver to support P2M and M2P transfer. It also
adds signal binding to support source request binding in the dts.
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
ST engineer has moved STM32 DMA controllers bindings under ./dma/stm32/
in Linux source code reference by this commit:
https://git.kernel.org/torvalds/c/8494ae75dde4
Signed-off-by: Haiyue Wang <haiyuewa@163.com>
Add additional property to allow a configurable delay to the display
initialization to allow the st7789v to be ready to receive commands.
Signed-off-by: Peter Johanson <peter@peterjohanson.com>
This commit introduces a driver for the Epson RX8130CE rtc.
The driver provides the following functionalities:
- Time setting and retrieval
- Periodic update interrupt support (1Hz)
- Alarm setting and retrieval (minute, hour, day)
- Frequency output control (32.768kHz, 1.024kHz, 1Hz, off)
- Power management (automatic power switching & battery charging)
- Calibration setting and retrieval
Signed-off-by: Måns Ansgariusson <Mansgariusson@gmail.com>
Add support for pinctrl to cc23x0 SoC. Like for other TI SoCs,
a node approach is implemented (no grouping approach).
Signed-off-by: Lars Thalian Morstad <l-morstad@ti.com>
Signed-off-by: Vebjorn Myklebust <v.myklebust@ti.com>
Signed-off-by: Stoyan Bogdanov <sbogdanov@baylibre.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Add support for flash to cc23x0 SoC. The driver interacts with VIMS
(Versatile Instruction Memory System) internal bus standing before NVM.
Signed-off-by: Stoyan Bogdanov <sbogdanov@baylibre.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Added SOC DTS for MCXW72
Adding BLE required info to MCXW72 dtsi
Signed-off-by: Yassine El Aissaoui <yassine.elaissaoui@nxp.com>
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Make use of ABUS support in the pinctrl driver to allocate
analog buses, rather than hard-coding bus 0 in the ADC driver.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
- Add device tree support for Renesas r7fa4m1ab3cfp with basic
gpio, clock control, sci, counter drivers, adc
- Add clock-frequency in renesas,ra-cgc-pclk binding to use the
clock frequency for iclk
Signed-off-by: Tran Van Quy <quy.tran.pz@renesas.com>
- Remove redundant node adc1 on ra4-cm4-common due to unsupported
- Update interrupt number for spi1
Signed-off-by: Tran Van Quy <quy.tran.pz@renesas.com>
