diff --git a/samples/net/wpan_serial/README b/samples/net/wpan_serial/README
index fb1dcc62b32..5b315dd00e4 100644
--- a/samples/net/wpan_serial/README
+++ b/samples/net/wpan_serial/README
@@ -3,7 +3,7 @@ Application implementing 802.15.4 "serial-radio" protocol.
 How to use:
 
 1. Build and flash Zephyr application to Quark board with 802.15.4 radio,
-   at the moment CC2520 is supported.
+   at the moment CC2520 radio is supported.
 2. Connect board to Linux PC, /dev/ttyACM[number] should appear
 3. Run Contiki-based native border router (6lbr, native-router, etc)
      Example for Contiki:
@@ -12,7 +12,15 @@ How to use:
      $ sudo ./border-router.native -v5 -s ttyACM0 fd01::1/64
 
 Now you have Contiki native border router, simple web server should show some
-802.15.4 devices.
+802.15.4 devices. Web server address is printed in the border-router output
+screen:
+...
+Server IPv6 addresses:
+ 0x62c5c0: =>fd01::212:4b00:531f:113a
+...
+Go to http://[fd01::212:4b00:531f:113a]/
+
+It shall show you Neighbors and Routes.
 
 PS: Make sure your disto ModemManager is disabled, otherwise it sends AT commands
 to our device ;)