From 1eb0fb20f33189c257d9954f083e4b0a82847e18 Mon Sep 17 00:00:00 2001 From: The Nguyen Date: Wed, 9 Apr 2025 16:39:14 +0700 Subject: [PATCH] boards: renesas: update ek_ra8d1 boards doc Update usage guide when using the parallel graphics expandsion Signed-off-by: The Nguyen --- boards/renesas/ek_ra8d1/doc/index.rst | 3 +-- boards/shields/rtk7eka6m3b00001bu/doc/index.rst | 15 ++++++++++----- 2 files changed, 11 insertions(+), 7 deletions(-) diff --git a/boards/renesas/ek_ra8d1/doc/index.rst b/boards/renesas/ek_ra8d1/doc/index.rst index 6be73b0aadb..b92b707f810 100644 --- a/boards/renesas/ek_ra8d1/doc/index.rst +++ b/boards/renesas/ek_ra8d1/doc/index.rst @@ -102,8 +102,7 @@ Supported Features | OFF | OFF | OFF | OFF | OFF | ON | ON | OFF | +-------------+-------------+--------------+------------+------------+------------+-------------+-----------+ - - For using the Parallel Graphics Expansion Port (J57) with the Graphics Expansion Board supplied as part of the kit, - please set switch SW1 as following configuration: + - For using the Parallel Graphics Expansion Port (J57), please set switch SW1 to the following configuration: +-------------+-------------+--------------+------------+------------+------------+-------------+-----------+ | SW1-1 PMOD1 | SW1-2 TRACE | SW1-3 CAMERA | SW1-4 ETHA | SW1-5 ETHB | SW1-6 GLCD | SW1-7 SDRAM | SW1-8 I3C | diff --git a/boards/shields/rtk7eka6m3b00001bu/doc/index.rst b/boards/shields/rtk7eka6m3b00001bu/doc/index.rst index 2ae42ca9255..579adcf6d93 100644 --- a/boards/shields/rtk7eka6m3b00001bu/doc/index.rst +++ b/boards/shields/rtk7eka6m3b00001bu/doc/index.rst @@ -17,17 +17,22 @@ Pins Assignment of the Renesas RTK7EKA6M3B00001BU Display +-----------------+--------------------------+ | Connector Pin | Function | +=================+==========================+ -| 1 | Display backlight enable | +| 39 | Display backlight enable | +-----------------+--------------------------+ -| 2 | Touch ctrl I2C SDA | +| 21 | Touch ctrl I2C SDA | +-----------------+--------------------------+ -| 3 | External interrupt | +| 38 | External interrupt | +-----------------+--------------------------+ -| 4 | Touch ctrl I2C SCL | +| 5 | Touch ctrl I2C SCL | +-----------------+--------------------------+ -| 6 | Display reset | +| 35 | Display reset | +-----------------+--------------------------+ +.. note:: + + - To use with EK-RA8D1 board, the :ref:`ek_ra8d1_rtk7eka6m3b00001bu` will be needed to connect this + shield to the Parallel Graphics Expansion Port (J57). + Hardware Requirements: **********************